In this article we’re going to look at how to create your own dog mask. We’ll cover the basics and then go on to take a look at some of the more advanced tips and techniques that you can use.
If you have a dog that likes to bark, and particularly if your dog loves to play in the garden and other regions of the home, you need to get them some particular dog protection.
Paper Plate 3d Dog Mask DIY Materials: This is the initial part of the setup that will look a little scary at first, but it’s actually quite straightforward. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not simply cut a rectangular shape from the cardboard, so you’ll need to cut around the edge of the mask so you get something that resembles a cone. The main thing here is to be realistic with what kind of paper plate that you’re using.
Then you’ll have to wrap the cardboard around the edges of the paper plate, making certain there is a good seal between the two pieces so that you can make certain that nothing will leak once you put the mask on. Be sure the edges are cut so that the edges are not sharp, as this may damage the edges of the mask.
Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making certain it runs smoothly and evenly across the entire mask. You’ll want to start with one side of the mask , so you can work your way round it before moving onto the other side. The paint needs to be slightly thicker than the cardboard, and it is best that you leave about one-fifth of an inch mask for dog inhalers of paint on the edges so that it runs across the cardboard.
Don’t worry too much about the paint getting stuck to your mask. It’s easy to eliminate it later, and it’ll leave you with a nice finished mask to show off to everybody! It’s also a good idea to wash away any excess paint once you’re done, so that you don’t end up with smudges or smears on your dog.
Then it’s time to paste the mask on your dog’s head. First you will need to be certain that you get a secure fit between the mask and your dog’s head. As soon as you’ve made sure that it is secure, then you may begin to glue the mask onto the dog’s face. Take the piece of cardboard that’s used for the base of the mask and fold it over. Be certain it’s quite strong and then use your hands to secure the cardboard down in place.
Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds until you have the mask snugged firmly onto the surface of your dog. Do not make the folds too large or else it could look messy. Once you’ve done this, you can then take out the mask and attach the cardboard ears. And attach the other part of the mask on the dog. Be sure the ears are level and be sure that it is not too short or long as this will cause some issues with the mask slipping off the dog’s face.
If you are using a dog mask because your pet security, you will need to do some sanding to make sure that it is secure on your dog. You can do this by sanding off any excess paper that may have been removed from your mask.